Konica Minolta IF-118 - Manual (Page 108)

Using Internet Faxing Operations 6
IF-118 6-9
6.2 Specifying the Destination Using Programmed
Dialing
The only transmission functions that can be used when an e-mail address
is selected are broadcast transmission and timer transmission.
For information on specifying these settings, refer to the manual provided
with the fax unit.
6.3 Sending a Document to Multiple Destinations
(Broadcast Transmission)
The same scan data can be sent to multiple destinations.
The maximum number of destinations that can be specified at one time is
243. However, only a maximum of 16 destinations can be specified by
entering the information directly.
✎
Tip
A recipient can be specified by either its e-mail address or fax number.
The results of all transmissions can be checked in the transmission
result report that is printed after the transmission is finished.
6.3.1 Using Broadcast Transmission
1 Load the document into the copier.
2 If necessary, adjust the fax resolution setting (p. 6-5).
3 Press the [FAX SET] key.
4 Press the [1] key on the 10-key pad.
Alternatively, press the [FAX SET]
key once to select “BROADCAST”,
and then press the [YES] key.