1 using timer transmission, Using timer transmission -12 – Konica Minolta IF-118 User Manual
Page 111
6
Using Internet Faxing Operations
6-12
IF-118
6.4
Sending a Document at a Specified Time (Timer
Transmission)
A document can be scanned and stored in the copier’s memory, then sent
at a specified time.
✎
Note
The time is specified using the 24-hour system.
If the copier has not been set to the current time, a document cannot
be sent at a specified time.
Timer transmission can be combined with broadcast transmission.
6.4.1
Using Timer Transmission
1
Load the document into the copier.
2
If necessary, adjust the fax resolution setting (p. 6-5).
3
Press the [FAX SET] key.
4
Press the [2] key on the 10-key pad.
Alternatively, press the [FAX SET]
key twice to select “TIMER TX”, and
then press the [YES] key.
5
Press the keys on the 10-key pad to
enter the time of the transmission,
and then press the [YES] key. If you
make a mistake, press the [NO] key,
and then enter the correct time.