Konica Minolta IF-118 - Manual (Page 94)

Using Scan to Server (FTP) Operations 5
IF-118 5-1
5 Using Scan to Server (FTP)
Operations
✎
Tip
In order to perform this operation, an FTP server address must have
already been specified. Use PageScope Light to specify the settings.
(Refer to “File Destination Setting” on page 3-29.)
A specified recipient can be notified by e-mail of the FTP server
address where a file was uploaded. This setting can be specified using
PageScope Light. (Refer to “File Destination Setting” on page 3-29.)
To cancel a job while the document is being scanned, press the [Stop]
key.
If the job could not be sent, a transmission result report is printed.
To delete a job after it has been scanned, but is still in the queue,
waiting to be sent, press the [FAX SET] key, and then select “CANCEL
RESERV.”. (Refer to “Cancelling a Queued Document” on page 6-14.)