Konica Minolta BIZHUB C30P - Manual (Page 123)

MetaConsole 2.3 including PageScope EMS Plug-Ins
page 109
The Manual Discovery screen opens (Figure 2.40).
3 Locate the Manual Device List field. Click the IP address you want to delete.
4 Click Remove.
Deleting All Manually Added Devices
To delete all manually added devices from the device list, follow this procedure:
1 In the navigation pane, expand the Konica Minolta Devices node and the Configuration
node.
2 Click Manual Discovery.
The Manual Discovery screen opens (Figure 2.40).
3 Click Remove All.
Specifying Events to Raise Alarms
MetaConsole enables you to select events that will result in alarms. An event is just a change
in information of the selected type. For details about the form that the actual alarm takes, see
the getting started guide for your console.
To select events that will raise alarms, follow this procedure:
1 In the navigation pane, expand the Konica Minolta Devices node and the Configuration
node.
2 Click Alarm Management.
The Alarm Management screen opens (Figure 2.41).