Konica Minolta BIZHUB C30P - Manual (Page 146)

Using PageScope EMS Plug-Ins
page 132
7 In the Contact Email field, enter the email address of the contact person.
8 Click Apply. Clicking on the Apply button causes all the entries to be set to the values you
have entered. The page refreshes itself so check to make sure that your entries were
changed successfully.
Note: This procedure differs if you are using Web Utilities. See the User’s Guide for PMU2
for specifics.
Networking Node
When opened, the Networking Node contains four pages: AppleTalk, TCP/IP, NetWare and
Interface. It also contains another Sub-Node: the Protocol Diagnostics Node. Network set-
tings, network interface information and protocol details are all accessible from these sections.
To access any of this information, follow this procedure:
1 In the Tree Pane, expand the device’s node.
2 Click on the Networking node.
Instructions for accessing or managing the functions included under this node follow.
AppleTalk Page: Managing the Properties
To display and change AppleTalk-related properties for a device, follow this procedure:
1 In the Tree Pane, click the Network node to expand it.
2 Click AppleTalk. The AppleTalk page will open in the right pane (Figure 3.13).
Figure 3.13: AppleTalk Page