Tcp/ip page: managing the properties – Konica Minolta BIZHUB C30P User Manual
Page 147
MetaConsole 2.3 including PageScope EMS Plug-Ins
page 133
3
In the AppleTalk field, click Enabled or Disabled, depending upon your preference.
4
In the Name field, enter an AppleTalk printer name for the device.
5
In the Zone field, enter the name of the device’s AppleTalk zone.
6
Click Apply.
TCP/IP Page: Managing the Properties
To display and change TCP-IP-related properties for a device, follow this procedure:
1
In the Tree Pane, click the Network node to expand it.
2
Click TCP/IP. The TCP/IP page will open in the right pane (Figure 3.14)
.
Figure 3.14: TCP/IP Page
3
In the TCP/IP field, click Enabled or Disabled, depending upon your preference.
4
In the IP Address field, enter the device’s IP address.
5
In the Subnet Mask field, enter the device’s subnet mask.
6
In the Default Gateway field, enter the device’s gateway.
7
In the Base Port Number field, enter the device’s base port number.
8
Click Apply.