Viewing alarms in netview – Konica Minolta BIZHUB C30P User Manual
Page 77
MetaConsole 2.3 including PageScope EMS Plug-Ins
page 63
Viewing Alarms in NetView
Note:
The time that is displayed for each alarm is the time the MetaConsole server logged
that alarm, and is based on the MetaConsole server’s time.
To view alarms, follow this procedure:
1
Display the appropriate MetaConsole client page in one of these ways:
•
Point your browser to the MetaConsole server. In the navigation pane, expand the
node of the MetaConsole server whose alarms you want to check. Click View Alarms.
•
When a managed device is selected in NetView, select MetaConsole from the Tools
menu, then select MetaConsole Configuration. In the MetaConsole client’s naviga-
tion pane, click View Alarms.
2
In the navigation pane, expand the node for the MetaConsole server whose alarms you
want to check. Click View Alarms. If the database is not configured, a message indicates
that fact. Otherwise, the View Alarms screen opens (Figure 2.18). Alarm log information
for up to 50 alarms is displayed.
Figure 2.18: NetView View Alarms Screen
3
To view more alarms, click one of the following in the Action list:
•
Get Next 50 Alarms
•
Get Previous 50 Alarms
•
View All Alarms