Toshiba Gigashot A Series - Manual (Page 140)

118 Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
Changing the HDMI Output Mode
Use this procedure to change the mode when the camera outputs data to
the HDMI output terminal.
1. From the setup menu (
p.36), select [HDMI OUTPUT].
Use the jog dial to select [HDMI OUTPUT] and then press the OK ( )
button.
2. Set the output terminal.
Use the jog dial to select the output mode and then press the OK ( )
button.
As a general rule, select [AUTO]. If images do not play back correctly
on the TV, etc., try the [1080i] or [480p] setting.
AUTO: The camera automatically selects an output mode
compatible with the connected HDMI cable.
1080i: Output using 1080i.
480p: Output using 480p.
SETUP
QUICK START
OUTPUT TV
EXIT
AUTO
HDMI OUTPUT
IMAGE OUTPUT TERMINAL
AUTO
SETUP
HDMI OUTPUT
RETURN
MEMO
This option is only available when the image output terminal is set to
[HDMI].