Toshiba Gigashot A Series - Manual (Page 172)

150 Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
Photographed
images are
too dark.
Your finger was
covering the flash
when you took a
picture with the flash.
(Still image)
Hold the camera
correctly.
22
You used the flash to
shoot a subject that
was beyond the
effective range of the
flash. (Still image)
Move closer to the
subject to take the shot.
Set the flash to
[SUPPRESSED
FLASH].
59
The subject is in very
bright surroundings.
Set a positive (+)
exposure bias setting.
61
Set the backlight
compensation to [ON].
62
Use the [SPOT]
metering mode.
81
There is insufficient
light.
Use the [NIGHT
SCENE] scene setting.
56
A negative () exposure
bias setting is set.
Set the correct exposure
bias setting.
61
Photographed
images are
too bright.
You used the flash
when too close to the
subject. (Still image)
Move further away from
the subject to take the
shot.
Set the flash to
[SUPPRESSED
FLASH].
59
The subject is in very
dark surroundings.
Set a negative ()
exposure bias setting.
61
Use the [SPOT]
metering mode.
81
There is too much light. Use the
[SNOW&BEACH] scene
setting.
56
A positive (+) exposure
bias setting is set.
Set the correct exposure
bias setting.
61
Backlight
compensation is set.
Set the backlight
compensation to [OFF].
62
The quality of
photographed
images is
poor.
The shots were taken
using a high-
magnification digital
zoom setting.
Set the digital zoom to
[OFF].
80
Problem Cause Solution Page