Toshiba Gigashot A Series - Manual (Page 62)

40 Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
Erasing Individual Images
This section describes how to erase images one at a time. Note that you
cannot erase protected images (
p.94) or images on a locked SD card
( p.12).
1. From the recording menu ( p.34) or play menu ( p.35), select
[ERASE].
Use the jog dial to select [ERASE] and then press the OK ( ) button.
2. Select [1 IMAGE].
Use the jog dial to select
[1 IMAGE] and then press the OK ( ) button.
3. Select the drive.
Move the OK ( ) button up or down to select the drive where the
image to be erased is located and then press the OK ( ) button.
4. Display the image to be erased.
Use the jog dial to select the image you want to erase.
If the image to be erased is not backed up (
p.139), the following
message is displayed: “THIS IMAGE IS NOT BACKED UP. ERASE
THIS IMAGE?”
ATTENTION
Erased images cannot be recovered.
PLAY MENU
SETUP
ERASE
PROTECT
COPY
EXIT
1 IMAGE
PLAY MENU
ERASE
CANCEL
PLAY MENU
ERASE
1 IMAGE
HDD
SD CARD
CANCEL
THIS IMAGE
IS NOT BACKED UP.
ERASE THIS IMAGE?
YES
NO
EXIT