Toshiba Gigashot A Series - Manual (Page 167)

Owner’s Manual 145
Hard Disk Camera GSC-A100FE/GSC-A40FE
Auto power
off does not
work.
Auto play is running. Stop auto play. 101
The camera is
connected to a PC.
Disconnect the camera
from the PC.
113
The camera is
connected to a printer
with PictBridge.
Exit PictBridge. 102
I can’t turn the
camera off.
Quick start is enabled. Set quick start to [OFF]. 115
I can’t use
quick start.
The camera has been
in standby mode for 20
minutes or more.
If the camera is left in
standby mode for 20
minutes or more, it turns
itself off.
116
The date and
time are
wrong.
The camera was left
for a long period with
the battery removed or
the AC adapter
disconnected.
Reset the date and time. 13
The camera was not
started up or shut
down correctly.
Reset the date and time. 13
I can’t create
albums.
There is no available
space on the recording
destination drive.
Use another SD card. 10
Change the destination
drive.
66
Erase some images. 39
Move some images to a
PC or DVD, etc.
139
There is already an
album numbered “999”
on the recording
destination drive.
Use another SD card. 10
Change the destination
drive.
66
Erase album no. 999. 47
The SD card
is not
recognized.
The SD card terminals
are soiled.
Wipe the SD card
terminals with a clean,
dry cloth.
-
The SD card is
damaged.
Use another SD card. 10
The LCD
monitor is
difficult to see.
The LCD brightness
setting is wrong.
Specify an “LCD
BRIGHTNESS” setting
that makes the LCD
monitor easier to see.
83
Problem Cause Solution Page