Toshiba Gigashot A Series - Manual (Page 32)

10 Owner’s Manual
Hard Disk Camera GSC-A100FE/GSC-A40FE
Specifications
Inserting and Removing SDHC/SD Cards
SDHC and SD memory cards are sold
separately.In this manual, SDHC and SD memory
cards are both referred to as “SD cards”.
Inserting an SD Card
1. Open the LCD monitor.
2. Insert an SD card into the SD card slot.
AC adapter (SQPH20W10P-02)
Power supply: 100 V to 240 V AC, 50/60 Hz
Rated output: 10 V DC, 2.0 A
Operating temperature: 32°F (0°C) to +104°F (+40°C)
Storage temperature: -40°F (-40°C) to +140°F (+60°C)
Dimensions: 1.9 inches × 1.0 inches × 3.9 inches
(49.5 mm × 25.5 mm × 99.5 mm) (W × H × D)
Weight (body): Approx. 7.1 oz (200 g)
MEMO
Use the power supply indicated on the supplied AC cable. When using
power supply other than the displayed voltage in other countries/region,
please purchase an AC cable that conforms to the standards used in
that country/region.
With the notch facing the bottom of the camera
(as shown in the figure), push the card firmly all
the way into the slot.
Check that the SD card is pushed fully and
securely into the slot.
You can specify an SD card as the location where
still images are saved ( p.68).