Toshiba Gigashot A Series - Manual (Page 143)

Owner’s Manual 121
Hard Disk Camera GSC-A100FE/GSC-A40FE
Using the Hard Disk Drive Protection Function
This is a hard disk drive protection function that operates when the camera
is dropped in any way. A sensor detects the fact that the camera has been
dropped and stops any data writing to the hard disk drive.
1. From the setup menu (
p.36), select [SYSTEM].
Use the jog dial to select [SYSTEM] and then press the OK ( ) button.
2. Select [HARD DISK PROTECTION].
Use the jog dial to select [HARD DISK PROTECTION] and then press
the OK ( ) button.
3. Select [ON].
Move the OK ( ) button up to select [ON] and then press the OK ( )
button.
ON: Hard disk drive protection is enabled.
OFF: Hard disk drive protection is disabled.
SETUP
SYSTEM
SOUND
EXIT
DATE AND TIME SETTING
HARD DISK PROTECTION
SETUP
RETURN
SYSTEM
SETUP
SYSTEM
HARD DISK PROTECTION
ON
OFF
CANCEL
IMPORTANT
Even when hard disk drive protection is enabled, mishandling the
camera can result in damage to the hard disk drive and/or the loss of
saved data. Hard disk drive protection does not guarantee the safety of
the hard disk drive or the data stored on it.
If the camera detects that it has been dropped during video recording
and stops access to the hard disk drive, the video file may be created
incorrectly and you may not be able to play it back. In this event, you
should erase the video.
If you set hard disk protection to [OFF] and then drop the camera, there
is a higher likelihood that the hard disk drive will be damaged.