Trunk formation with pbr policy – Brocade Communications Systems Brocade ICX 6650 6650 User Manual

Page 146

Advertising
background image

126

Brocade ICX 6650 Security Configuration Guide

53-1002601-01

Policy Based Routing

Brocade(config)# interface ethernet 1/3/1
Brocade(config-if-e10000-1/3/1)# ip address 192.168.1.204/32
Brocade(config-if-e10000-1/3/1)# ip policy route-map file-13

Trunk formation with PBR policy

When a trunk is formed, the PBR policy on the primary port applies to all the secondary ports. If a
different PBR policy exists on a secondary port at the time of a trunk formation, that policy is
overridden by the PBR policy on the primary port. If the primary port does not have a PBR policy,
then the secondary ports will not have a PBR policy.

When a trunk is removed, the PBR policy that was applied to the trunk interface is unbound
(removed) from former secondary ports. If global PBR is configured, the secondary ports adhere to
the global PBR; otherwise, no PBR policy is bound to former secondary ports.

Advertising