Brocade Communications Systems Brocade ICX 6650 6650 - Manual (Page 216)

196 Brocade ICX 6650 Security Configuration Guide
53-1002601-01
Sample 802.1X configurations
Sample 802.1X configurations
This section illustrates a sample point-to-point configuration and a sample hub configuration that
use 802.1X port security.
Point-to-point configuration
Figure 6 illustrates a sample 802.1X configuration with Clients connected to three ports on the
Brocade device. In a point-to-point configuration, only one 802.1X Client can be connected to each
port.
FIGURE 6 Sample point-to-point 802.1X configuration
Same point-to-point 802.1x configuration
The following commands configure the Brocade device in Figure 6
Brocade(config)# aaa authentication dot1x default radius
Brocade(config)# radius-server host 192.168.9.22 auth-port 1812 acct-port 1813
default key mirabeau dot1x
Brocade(config)# dot1x-enable ethernet 1/2/1 to 1/2/3
Brocade(config-dot1x)# re-authentication
Brocade(config-dot1x)# timeout re-authperiod 2000
Brocade(config-dot1x)# timeout quiet-period 30
Brocade(config-dot1x)# timeout tx-period 60
Brocade(config-dot1x)# maxreq 6
Brocade(config-dot1x)# exit
Brocade(config)# interface ethernet 1/2/1
Brocade(config-if-e10000-1/2/1)# dot1x port-control auto
Brocade(config-if-e10000-1/2/1)# exit
RADIUS Server
(Authentication Server)
Clients/Supplicants running 802.1X-compliant client software
192.168.9.22
e1/2/1 e1/2/2 e1/2/3
Brocade Switch
(Authenticator)