Brocade Communications Systems Brocade ICX 6650 6650 - Manual (Page 243)

Brocade ICX 6650 Security Configuration Guide 223
53-1002601-01
Displaying information about MAC-based VLANs
Displaying denied MAC addresses
Enter the show table-mac-vlan denied-mac command to display information about denied
(authentication failed) MAC addresses.
Brocade(config)# show table-mac-vlan denied-mac
-------------------------------------------------------------------------------
MAC Address
Port Vlan Authenticated Time Age dot1x
-------------------------------------------------------------------------------
0000.0030.1002
1/1/1 4092 No 00d00h11m57s H40 Dis
Syntax: show table-mac-vlan denied-mac
The following table describes the information in this output.
Vlan The VLAN to which the MAC address has been assigned.
Authenticated Yes indicates authentication has been successful.
Inp indicates authentication is in progress.
Time The time at which each MAC address was authenticated. If the clock is set on the Brocade
device, then the actual date and time are displayed. If the clock has not been set, then the time
is displayed relative to when the device was last restarted.
Age The age of the MAC address entry in the authenticated MAC address list.
Dot1x Indicates whether 802.1X authentication is enabled or disabled for each MAC address.
TABLE 51 Output field description of show table-mac-vlan denied-mac command
Field Description
MAC Address The denied MAC address for which the information is displayed.
Port The port where MAC-based VLAN is enabled.
Vlan This field displays VLAN 4092 for blocked hosts, or the restricted VLAN ID if it is configured on
the port.
Authenticated No indicates that authentication has failed.
Inp indicates that authentication is in progress.
Time The time at which authenticated failed.
Age The age of the MAC address entry in the authenticated MAC address list.
Dot1x Indicates whether 802.1X authentication is disabled (Dis) or enabled (Ena) for this MAC address.
TABLE 50 Output field description of the show table-mac-vlan allowed-mac command
Field Description