Brocade Communications Systems Brocade ICX 6650 6650 - Manual (Page 215)

Brocade ICX 6650 Security Configuration Guide 195
53-1002601-01
Displaying 802.1X information
Displaying information about the ports in an 802.1X multiple-host configuration
To display information about the ports in an 802.1X multiple-host configuration, enter the show
dot1x mac-session brief command.
Brocade(config-dot1x)# show dot1x mac-session brief
Port Number of Number of Dynamic Dynamic Dynamic
users Authorized users VLAN ACL MAC-Filt
--------------------------------------------------------------------
1/1/1 0 0 no no no
1/1/2 0 0 no no no
1/1/3 0 0 no no no
1/1/4 0 0 no no no
1/1/5 0 0 no no no
1/1/6 0 0 no no no
1/1/7 0 0 no no no
1/1/8 0 0 no no no
1/1/9 0 0 no no no
1/1/10 0 0 no no no
1/1/11 0 0 no no no
1/1/12 0 0 no no no
1/1/13 0 0 no no no
1/1/14 0 0 no no no
1/1/15 0 0 no no no
1/1/16 0 0 no no no
Syntax: show dot1x mac-session brief
The following table describes the information displayed by the show dot1x mac-session brief
command.
TABLE 38 Output from the show dot1x mac-session brief command
Field Description
Port Information about the users connected to each port.
Number of users The number of users connected to the port.
Number of Authorized users The number of users connected to the port that have been successfully
authenticated.
Dynamic VLAN Whether the port is a member of a RADIUS-specified VLAN.
Dynamic Filters Whether RADIUS-specified IP ACLs or MAC address filters have been applied
to the port.