Brocade Communications Systems Brocade ICX 6650 6650 - Manual (Page 172)

152 Brocade ICX 6650 Security Configuration Guide
53-1002601-01
Viewing traffic policies
The TPD-name is the name of the traffic policy definition for which you want to clear traffic policy
counters.
Viewing traffic policies
To view traffic policies that are currently defined on Brocade ICX 6650, enter the show traffic-policy
command. The following example shows the output of this command.
Table 23 explains the output
of the show traffic-policy command.
Syntax: show traffic-policy [TPD-name]
To display all traffic policies, enter the show traffic-policy command without entering a TPD name.
TABLE 23 Traffic policy information
Parameter Description
Traffic Policy The name of the traffic policy.
Metering Shows whether or not rate limiting was configured as part of the traffic policy:
•
Enabled – The traffic policy includes a rate limiting configuration.
•
Disabled – The traffic policy does not include a rate limiting configuration.
Mode If rate limiting is enabled, this field shows the type of metering enabled on the port:
•
Fixed Rate-Limiting
•
Adaptive Rate-Limiting
cir The committed information rate, in packets, for the adaptive rate limiting policy.
cbs The committed burst size, in packets per second, for the adaptive rate-limiting policy.
pir The peak information rate, in packets, for the adaptive rate limiting policy.
pbs The peak burst size, in packets per second, for the adaptive rate limiting policy.
Counting Shows whether or not ACL counting was configured as part of the traffic policy:
•
Enabled – Traffic policy includes an ACL counting configuration.
•
Not Enabled – Traffic policy does not include an ACL traffic counting configuration.
Brocade# show traffic-policy t_voip
Traffic Policy - t_voip:
Metering Enabled, Parameters:
Mode: Adaptive Rate-Limiting
cir: 100 Pkts/s, cbs: 2000 Pkts, pir: 200 Pkts/s, pbs: 4000
Pkts
Counting Not Enabled