Brocade Communications Systems Brocade ICX 6650 6650 - Manual (Page 280)

260 Brocade ICX 6650 Security Configuration Guide
53-1002601-01
Example port authentication configurations
Example port authentication configurations
This section includes configuration examples of multi-device port authentication with dynamic
VLAN assignment, and multi-device port authentication and 802.1X authentication.
Multi-device port authentication with dynamic
VLAN assignment
Figure 11 illustrates multi-device port authentication with dynamic VLAN assignment on a Brocade
device. In this configuration, a PC and an IP phone are connected to a hub, which is connected to
port e1 on a Brocade device. The profile for the PC MAC address on the RADIUS server specifies
that the PC should be dynamically assigned to VLAN 102, and the RADIUS profile for the IP phone
specifies that it should be dynamically assigned to VLAN 3.
Authenticated Whether the MAC address has been authenticated by the RADIUS server.
Time The time at which the MAC address was authenticated. If the clock is set on the
Brocade device, then the actual date and time are displayed. If the clock has not
been set, then the time is displayed relative to when the device was last
restarted.
Age The age of the MAC address entry in the authenticated MAC address list.
Dot1x Indicated if 802.1X authentication is enabled or disabled for the MAC address
TABLE 63 Output from the show auth-mac-addresses detailed command (Continued)
Field Description