Displaying mac-based vlan logging, Clearing mac-vlan information, Sample mac-based vlan application – Brocade Communications Systems Brocade ICX 6650 6650 User Manual

Page 247

Advertising
background image

Brocade ICX 6650 Security Configuration Guide

227

53-1002601-01

Clearing MAC-VLAN information

Displaying MAC-based VLAN logging

Enter the show logging command to display MAC-based VLAN logging activity.

Clearing MAC-VLAN information

Enter the clear table-mac-vlan interface command to clear MAC-VLAN information. Add the
interface id to clear information for a specific interface.

Brocade# clear table-mac-vlan <interface>

Sample MAC-based VLAN application

Figure 9

illustrates a sample configuration that uses MAC-based VLAN on port e 1/1/1 on the

Brocade device. In this configuration, three host PCs are connected to port e 1/1/1 through a hub.

Host A MAC address is statically configured on port e 1/1/1. The profile for Host B MAC address on
the RADIUS server specifies that the PC should be assigned to VLAN 2. Host C profile does not exist
in the RADIUS server, and will be put into a restricted VLAN.

Brocade# show logging
Syslog logging: enabled (0 messages dropped, 0 flushes, 15 overruns)
Buffer logging: level ACDMEINW, 50 messages logged
level code: A=alert C=critical D=debugging M=emergency E=error
Static Log Buffer
0d00h00m12s:A:System: Power supply 1 is up
Dynamic Log Buffer (50 lines):
0d18h46m28s:I:running-config was changed from console
0d02h12m25s:A:MAC Based Vlan Mapping failed for [0000.110011.0108 ] on port 1/2/1
(Invalid User)
0d02h08m52s:A:MAC Based Vlan Mapping failed for [0000.0011.011b ] on port 1/2/1
(Invalid User)
0d02h05m01s:A:MAC Based Vlan Mapping failed for [0000.0011.00df ] on port 1/2/1
(Invalid User)
0d02h01m15s:A:MAC Based Vlan Mapping failed for [0000.0011.0108 ] on port 1/2/1
(Invalid User)
0d02h01m15s:A:MAC Based Vlan Mapping failed for [0000.0011.0107 ] on port 1/2/1
(Invalid User)
0d01h58m43s:N:MAC Based Vlan Enabled on port 1/2/1
0d01h58m32s:N:MAC Based Vlan Disabled on port 1/2/1
0d01h39m00s:I:running-config was changed from console
0d01h38m28s:I:System: Interface ethernet 1/1/7, state up
0d01h38m27s:I:System: Interface ethernet 1/1/6, state up
0d01h38m27s:I:System: Interface ethernet 1/1/4, state up
0d01h38m27s:I:System: Interface ethernet 1/1/5, state up

Advertising