B&B Electronics Zlinx ZP Series - Manual (Page 30)

26 Manual Documentation Number: ZP24D-250RM-SR-2508
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
an Invalid Parameter
0x0E - Association Request
Channel Access Failure. Request
was not transmitted - CCA failure
0x0F - Remote Coordinator did
not send an ACK after
Association Request was sent
0x10 - Remote Coordinator did
not reply to the Association
Request, but an ACK was
received after sending the request
0x11 - [reserved]
0x12 - Sync-Loss - Lost
synchronization with a Beaconing
Coordinator
0x13 - Disassociated - No longer
associated to Coordinator
DA ( v1.x80*)
Networking
{Association}
Force Disassociation. End
Device will immediately
disassociate from a Coordinator
(if associated) and reattempt to
associate.
- -
FP ( v1.x80*)
Networking
{Association}
Force Poll. Request indirect
messages being held by a
coordinator.
- -
AS ( v1.x80*)
Networking
{Association}
Active Scan. Send Beacon
Request to Broadcast Address
(0xFFFF) and Broadcast PAN
(0xFFFF) on every channel. The
parameter determines the time
the radio will listen for Beacons
on each channel. A
PanDescriptor is created and
returned for every Beacon
received from the scan. Each
PanDescriptor contains the
following information:
CoordAddress (SH, SL)<CR>
CoordPanID (ID)<CR>
CoordAddrMode <CR>
0x02 = 16-bit Short Address
0x03 = 64-bit Long Address _
Channel (CH parameter) <CR> _
SecurityUse<CR> _
ACLEntry<CR> _
SecurityFailure<CR> _
SuperFrameSpec<CR> (2 bytes):
bit 15 - Association Permitted
(MSB)
bit 14 - PAN Coordinator
bit 13 – Reserved
bit 12 - Battery Life Extension
bits 8-11 - Final CAP Slot
bits 4-7 - Superframe Order
bits 0-3 - Beacon Order
GtsPermit<CR>
RSSI<CR> (RSSI is returned as -
0 - 6 -