Hale SMR - Manual (Page 11)

Stainless Max Series Pumps 1-1
Safety Precautions
SECTION
1
: SAFETY PRECAUTIONS
IMPORTANT!
THE HALE STAINLESS MAX TM SM SERIES PUMPS ARE DESIGNED FOR
OPTIMUM SAFETY OF ITS OPERATORS. FOR ADDED PROTECTION,
PLEASE FOLLOW THE SAFETY GUIDELINES LISTED IN THIS SECTION
AND ADHERE TO ALL WARNING, DANGER, CAUTION AND IMPORTANT
NOTES FOUND WITHIN THIS MANUAL.
THIS SECTION ON SAFETY MUST BE CAREFULLY READ, UNDERSTOOD
AND ADHERED TO STRICTLY BY ALL INSTALLERS AND OPERATORS
BEFORE ATTEMPTING TO INSTALL OR OPERATE THE CAFSPRO
PUMP SYSTEM.
Stainless Max is a trademark of Hale Products, Incorporated. All other
brand and product names are the trademarks of their respective
holders.
GUIDELINES
Read all instructions thoroughly before beginning
any installation process.
NOTICE !
THE PROCEDURES IN THIS MANUAL ARE GENERAL OPERATING PRO-
CEDURES. THEY DO NOT REPLACE THE PROCEDURES AND POLICIES
ESTABLISHED BY YOUR COMPANY, NOR DO THEY REPLACE THE
RECOMMENDATIONS AND PROCEDURES PROVIDED BY THE APPARA-
TUS MANUFACTURER'S MANUAL.
REFER TO COMPANY PROCEDURES ON SETTING WHEEL CHOCKS AS
WELL AS LAYOUT AND CONNECTION OF HOSES. ALL VALVES, DRAIN
COCKS, AND CAPS SHOULD BE CLOSED.
REFER TO THE FIRE DEPARTMENT PROCEDURES ON SETTING WHEEL
CHOCKS AS WELL AS LAY OUT AND CONNECTION OF SUCTION AND
DISCHARGE HOSES.
❑
Use care when removing the Stainless Max system from its
packaging to prevent personal injury and/or damage to the
system.
❑
To fully support the stainless max pump assembly, use all
mounting bolt holes provided in the gearbox and/or pedestal
mount.