BNC 835 Programmer Manual User Manual

Page 39

Advertising
background image


Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901

Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com

:LIST:MANual

[SOURce]:LIST:MANual <value>|UP|DOWN

[SOURce]:LIST:MANual?

This command sets a list or step sweep point as the current sweep point controlling the frequency and

power output. If list or step mode is controlling frequency or power, or both, then the indexed point in

the respective list(s) will be used.

Entering a value with this command will have no effect, unless MANual is the selected mode. Refer to

:LIST:MODE

command for setting the proper mode.

If the point selected is beyond the length of the longest enabled list, then the point will be set to the

maximum possible point and an error will be generated.

Range 1–3’501

:LIST:MODE

[SOURce]:LIST:MODE AUTO|MANual

[SOURce]:LIST:MODE?

This command sets the operating mode for the current list or step sweep.

AUTO

This choice enables the selected sweep type to perform a sweep of all points.

MANual

This choice enables you to select a single sweep point. The selected point controls

the frequency and/or amplitude according to the sweep type. Refer to

:LIST:MANual

command for selecting a sweep point.

*RST AUTO

:LIST:POWer

[SOURce]:LIST:POWer <value>{,<value>}

[SOURce]:LIST:POWer?

This command sets the amplitude for the current list RAM points.

:LIST:POWer:POINts

[SOURce]:LIST:POWer:POINts?

This command queries the number of power points in the current list sweep RAM.

:LIST:PROGgress

[SOURce]:LIST:PROGgress?

This query returns the progress of an active list sweep, 0.0…1.0.

:MEMory:FILE:LIST

:MEMory:FILE:LIST? FIRSt|LAST|NEXT|PREVious

This query returns the file names of the available list files. FIRSt and LAST return the first/last list file

name. NEXT and PREVious return the file name of the next/previous list. This allows to enumerate all

available list files. After reaching the last or first list file, NEXT or PREVious continue returning the

names of the last or first list file.

Advertising
This manual is related to the following products: