1 introduction, Introduction, 1introduction – BNC 835 Programmer Manual User Manual
Page 5
Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com
1
Introduction
This manual provides information for remote operation of the Berkeley Nucleonics Signal Generators
using commands sent from an external controller via Ethernet, USB, or GPIB. It includes the following:
• A general description of the LAN and the bus data transfer and control functions
• A general description of how to establish connection via LAN, USB, or GPIB
• A listing of the IEEE-488 Interface Function Messages recognized by the signal generator with
a description of its response
• A complete listing and description of all the Standard Commands for Programmable
Instruments (SCPI) commands that can be used to control signal generator operation with
examples of command usage