Apple Logic Pro 9 - Manual (Page 1220)

Metronome Settings
The Metronome project settings combine all parameters for speaker click, MIDI click, and
KlopfGeist—a virtual metronome sound source. KlopfGeist can be used in addition to, or
in place of, the speaker and MIDI click sources.
Note: KlopfGeist is a software instrument found in the Plug-in menu of instrument channel
strips. KlopfGeist is inserted into instrument channel 256 by default. Logic Pro automatically
creates instrument channel 256 (and inserts KlopfGeist) when the Software Click Instrument
(KlopfGeist) checkbox is selected. Theoretically, any other Logic Pro or third-party software
instrument could be used as a metronome sound source on instrument channel 256. For
full details about KlopfGeist, see the KlopfGeist chapter in the Logic Studio Instruments
manual.
To open the Metronome project settings
Do one of the following:
µ
Choose File > Project Settings > Metronome (or use the Open Metronome Project Settings
key command).
µ
Click the Settings button in the Arrange toolbar, then choose Metronome from the pop-up
menu.
µ
Control-click the Metronome button in the Transport bar, then choose Metronome Settings
from the shortcut menu.
1220 Chapter 43 Project Settings in Logic Pro