Apple Logic Pro 9 - Manual (Page 234)

Creating Tracks for Selected Regions
The Track > New for Selected Regions function creates a new track for the selected regions
on a track. The selected regions are moved to the new track, and removed from the source
track. All new tracks use the same channel strip assignment as the original track.
If you use this command when multiple regions are selected across several tracks, a new
track is created for each source track. For example:
• Two regions are selected on track a, one region is selected on track b, four regions are
selected on track c.
• Following use of the command, the two regions on track a are moved to the newly
created track a copy, the region on track b is moved to b copy, and the four regions of
track c to c copy.
• If you want to create individual tracks for the two track a regions (now on track a copy),
simply select the a copy track, which will automatically select all regions on the track,
and repeat the command.
Deleting Tracks in the Arrange Area
If you delete a track, the channel strip assigned to the track is also deleted, and removed
from the Mixer (unless assigned to another track that is in use).
To delete a track
Do one of the following:
µ
Select the track, then choose Track > Delete (or use the corresponding key command).
Tip: If no regions are selected in the Arrange area, you can delete the selected track by
pressing the Delete key.
µ
Grab the track, and remove it from the track list by dragging it to the left.
To delete all tracks that do not contain regions
µ
Choose Track > Delete Unused in the Arrange area (or use the corresponding key
command).
234 Chapter 9 Working with Tracks