Apple Logic Pro 9 - Manual (Page 457)

4 Set a cycle area by doing one of the following:
• Drag the left and right locators in the top part of the Bar ruler.
• Modify the locator fields in the Transport bar.
5 Click the Record button in the Transport bar (or use the corresponding key command,
default assignment: *).
Record as many cycle passes as you wish. When the second cycle pass ends and the third
cycle pass begins, a take folder is created on the arrange track. Each subsequent cycle
pass is then added to this take folder.
Note: Each previous take track is automatically muted during recording. When you stop
recording, you can listen to the individual takes in the take folder by selecting them.
6 Stop recording by clicking the Stop button in the Transport bar (or press the Space bar).
The result is a closed take folder that contains each of the recorded MIDI takes on a single
arrange track.
7 Open the take folder by doing one of the following:
• Click the disclosure triangle in the top-left corner of the take folder (or use the
Un/disclose Take Folder key command).
457 Chapter 14 Recording in Logic Pro