Apple Logic Pro 9 - Manual (Page 805)

The new name is applied to all selected channel strips.
Note: If the track name ends with a number, this number will automatically be incremented
by 1 for each subsequent channel strip. To turn off automatic numbering, place a space
after the number at the end of the name you type. All selected channel strips will then
end with the same number.
Linking Control Surfaces to the Mixer
Control surface groups follow changes in the Mixer, including changes to the Mixer view,
when the Link Control Surfaces setting is enabled in the Mixer.
To link control surfaces to the Mixer
µ
Open the View menu and choose Link Control Surfaces if it is not already selected (or use
the corresponding key command).
For details, see the Logic Pro Control Surfaces Support manual.
805 Chapter 27 Mixing