Apple Logic Pro 9 - Manual (Page 259)

• Overload Protection Only: Allows downward normalization in case of overloads—levels
above 0 dB, which would lead to clipping—but no normalization in case of lower
levels.
• On: Allows full bidirectional normalization.
• Restore Defaults button: Click this button to set all parameters in the dialog to their
default settings.
4 Click OK to trigger an in place bounce of the selected track(s).
Note: Following the in place bounce, the original track content (all regions, and all
automation data except for volume, pan, and sends) is lost and the original instrument
or track channel strip is reset. An Undo is always possible, of course.
Bounce-Replacing All Tracks
You can perform an in place bounce and replace for all audio and software instrument
tracks available in the Arrange window.
To perform an in place bounce of all tracks
1 Choose Track > Bounce-Replace All Tracks.
Note: This command only works if your Arrange area contains audio or software instrument
tracks.
2 You are prompted to save your project; click Yes or No, as appropriate.
The Bounce Replace All Tracks dialog appears.
3 Define the following parameters, as required.
• Bypass Effect Plug-ins checkbox: Select this checkbox to disable all plug-ins on the source
track during the bounce process.
259 Chapter 9 Working with Tracks