Apple Logic Pro 9 - Manual (Page 158)

Switching Between Marker Alternatives
You can use up to nine different marker variations per project.
To switch between the different marker alternatives
Do one of the following:
µ
Choose Options > Marker Alternatives in the Marker List, then choose a Marker List.
µ
Choose a number from the Alternative pop-up menu in the Marker List.
µ
Choose a number from the Alternative pop-up menu in the Marker track.
Customizing the Marker Display in the Marker List
There are two display options for marker position and length in the Marker List:
• View > Event Position and Length in SMPTE Units: Switches the marker position and
length display between bar positions and SMPTE time positions.
• View > Length as Absolute Position: Switches the marker length display between actual
(relative) length and (absolute) display of the marker’s end position (shown as a bar
position).
Importing, Removing, and Exporting Marker Information
When you record or bounce an audio file, the current Marker List is added to the resulting
file. In some situations, you may want to import marker information from an audio file
that was recorded in a different project. This is possible within the borders of any selected
audio region of that file in the Arrange window.
To import marker information from an audio file
µ
Choose Options > Marker > Import Marker from Audio File.
You can also export the current Marker List within the borders of any selected Arrange
audio region to an audio file. However, you should first remove any marker information
that exists in the audio file.
To remove marker information from an audio file
µ
Choose Options > Marker > Remove Marker from Audio File.
Then you can export the current marker information to the audio file.
To export marker information to an audio file
µ
Choose Options > Marker > Export Marker to Audio File.
158 Chapter 6 Working with Markers