Liquid dispensing at the height of the vessel edge – Eppendorf epMotion 5070 User Manual
Page 36
Advertising
Dispensing liquids
epMotion
®
5070
English (EN)
36
6.3.3
Liquid dispensing at the height of the vessel edge
In the software, the pipette tip can be positioned at a height of 3 mm – 4 mm below the edge of the vessel
using the
Dispense from top
option. The height of the pipette tip does not change.
Use the option for:
• Quick dispensing
• Dispensing in vessels with small diameters, e.g., 384-well plates, capillaries
The tips remains in the upper area of the vessel and do not travel further into the vessel. This virtually
eliminates the possibility of the pipette tip becoming contaminated.
• Dispensing in plates with vastly different levels in the wells
Advertising