Eppendorf epMotion 5070 - Manual (Page 61)

Operation
epMotion ® 5070
English (EN)
61
9 Operation
9.1 First steps
This chapter describes how to operate the epMotion and how to execute applications.
 Information on how to create applications is available in the software operating manual.
9.1.1 Switching on the epMotion
Prerequisites
• The epMotion has been installed and commissioned by skilled personnel authorized by Eppendorf.
epMotion5070
1. Close the front hood.
epMotion5070f
2. Bring the front screen of the Cleanbench into the working position.
The light barrier is generated.
epMotion 5070 and 5070f
3. Switch on the device at the mains power switch.
• The EasyCon starts and displays the start screen.
• The carrier travels to the home position.
• The epMotion is ready for operation.
9.1.2 Using the EasyCon
You can find a detailed description of the EasyCon in the software operating manual.
9.1.2.1 Touch-sensitive screen (touch panel)
 Touch the screen with your finger.
You can also wear thin rubber gloves when operating the EasyCon.
 Alternatively, you can use a stylus which is suitable for capacitive touch panels.
9.1.2.2 Mouse
You can either use a mouse only or use it in addition to the touch-sensitive EasyCon screen.
 Connect the USB mouse to one of the USB ports.
The mouse arrow will appear on the screen as soon as the EasyCon has recognized the mouse.