Eppendorf epMotion 5070 - Manual (Page 44)

Labware – vessels, plates and pipette tips
epMotion
® 5070
English (EN)
44
7.4.3 Tip holder for epT.I.P.S. Motion Reloads
Abb. 7-12: Tip Holder
Fig. 7-12: Tip Holder
The tip holder is an adapter that holds the epT.I.P.S. Motion Reloads.
7.4.3.1 epT.I.P.S. Motion Reloads on the tip holder
Abb. 7-13: Placing the tray on the tip holder
Fig. 7-13: Placing the tray on the tip holder
1. Open the Reload packaging.
2. Remove the tray with the tips.
3. Place the tray on the tip holder. The notch in the tray must be on the labeled side of the tip holder.
1 Tips
2 Tray
3 Tip Holder
1
2
3