Eppendorf epMotion 5070 - Manual (Page 40)

Labware – vessels, plates and pipette tips
epMotion
® 5070
English (EN)
40
7.3 Reservoirs
Reservoirs make liquid available. Reservoirs are available in 30 mL, 100 mL and 400 mL sizes. Reservoirs
for 30 mL and 100 mL are placed in a Reservoir Rack.
Reservoirs are made of polypropylene (PP).
Properties of 30 mL and 100 mL reservoirs
• 30 mL reservoirs can be used with all tips.
• The 30 mL reservoirs are very tight at the bottom. If the bottom tolerance is reduced, reservoirs for
30 mL can also be lifted using pipette tips.
• Reservoirs for 30 mL and 100 mL have a ribbed base. If the bottom tolerance has been reduced, the
information on the remaining volume is not precise.
• Reservoirs for 30 mL and 100 mL are particularly well-suited for eight-channel dispensing tools.
• The eight-channel dispensing tools TM 50 and TM 300 cannot be immersed all the way to the bottom in
the 100 mL reservoir. A higher remaining volume remains in the reservoir.
Properties of 400 mL reservoirs
• The remaining volume of the 400 mL reservoir is approx. 10 mL.
Abb. 7-6: 100 mL and 30 mL reservoirs
Fig. 7-6: 100 mL and 30 mL reservoirs
Abb. 7-7: Reservoir 400 mL
Fig. 7-7: Reservoir 400 mL