Connector assembly figure 2 -5, Connector assembly figure 3 -5, Connector assembly figure 4 -5 – JLG 800A_AJ ANSI Service Manual User Manual
Page 403
Advertising
SECTION 7 - BASIC ELECTRICAL INFORMATION & SCHEMATICS
3120740
– JLG Lift –
7-5
3. After all required contacts have been inserted, the
wedge lock must be closed to its locked position.
Release the locking latches by squeezing them
inward (See Figure 7-8.).
4. Slide the wedge lock into the housing until it is flush
with the housing (See Figure 7-9.).
Figure 7-7. Connector Assembly Figure 2
Figure 7-8. Connector Assembly Figure 3
Figure 7-9. Connector Assembly Figure 4
Advertising