2N Analogue UMTS gateway 2N EasyGate UMTS USB - User Manual, v1.00 - Manual (Page 11)

10
Dialing end signaling:
•
Dialing reception has been terminated. Connection is being established.
PIN tone:
•
Enter the PIN code.
•
This tone is transmitted upon power up if the PIN has to be entered manually.
PUK tone:
•
Enter the PUK code.
•
This tone is transmitted upon repeated wrong PIN entering attempts. USIM card is
blocked.
3.2.2. Programming Mode Tones
Tones confirming/refusing the values entered are transmitted during telephone line
based programming. Each tone has a different melody.
Confirmation:
•
Confirms that the service password or parameter number entered is correct and
has been accepted.
Refusal:
•
Incorrect parameter number;
•
Incorrect parameter value
•
Transmitted when a parameter is cancelled with a .
Saving:
•
Parameter value entered is correct and has been saved.