2N Analogue UMTS gateway 2N EasyGate UMTS USB - User Manual, v1.00 - Manual (Page 8)

7
2.2. External Antenna Connection
Screw the antenna enclosed into the SMA antenna connector. Tighten the antenna
connector gently with your hand - never use wrenches!
The antenna enclosed has a sufficient gain for trouble-free operation in normal
conditions. If the UMTS signal is poor or you want to place your antenna separately
from EasyGate UMTS Data, you can use an antenna with an SMA-connector
terminated cable. The antenna should be mounted vertically.
The Antenna shall be located within the same building as the main equipment.
For antenna and cable parameters see the “Technical Parameters“.
2.3. USIM Card Installation
Use the modern USIM cards designed for UMTS networks to avoid problems
Open the USIM card holder on EasyGate UMTS Data’s backside, insert the USIM
card and close it. Select the required UMTS provider and USIM card services, such as
call forwarding, call barring, preferred networks, SMS service centre, etc. in your mobile
phone before inserting your USIM card in EasyGate UMTS Data.