2N Analogue UMTS gateway 2N EasyGate UMTS USB - User Manual, v1.00 - Manual (Page 31)

30
Setting options:
-Disable -The GSM module logs out of a foreign network and attempts to
register again in within 5 minutes.
-Enable -EasyGate works in any GSM network.
Default setting: Disable
Incoming calls enable
Function No.: 43
With this parameter you can reject all incoming calls.
Setting options:
Enable - Incoming calls ring on the telephone line.
Disable - Incoming calls are rejected.
Default setting: Enable
Call Handover workaround
Function No.: -
This parameter offers a workaround to prevent problems during call handover
into the 1900 MHz (or 1800 MHz) band, caused by non-conforming
configurations of the 1900 MHz (or 1800 MHz) GSM network.
Setting options:
-Disable -Disable workaround.
-Enable -Enable workaround.
Select only when handover into a 1800/1900MHz band fails.
Default setting: Disable
8.3.5.1 Low credit checking in prepaid USIM
Time period for low credit checking [h] Function No.: -
Set to change time interval between credit checks. If your credit drops under
defined value, EasyGate sends SMS "LOW CREDIT". The "0" setting means that
the function is disabled.
Setting options: 0-255 h
Step: 1 h
Default setting: 0
Code for credit checking
Function No.: -
Credit in prepaid SIM cards is checked by network function, which displays text
message on mobile phone display. Code of network function must be terminated
with "#" symbol.
ATTENTION - find out if you have to pay for this function. Every check can lower
your credit.
Setting options: 0-8 characters (0-9,*,#,+)
Default setting: blank
Minimal credit
Function No.: -
Set minimal credit value to send warning SMS "LOW CREDIT". If credit is lower
than given value, warning SMS is send after every credit check, until you
recharge your SIM card.
Setting options: 0-999
Step:
1
Default setting: 0