2N Analogue UMTS gateway 2N EasyGate UMTS USB - User Manual, v1.00 - Manual (Page 35)

34
8.3.8. Security Parameters
PIN - value
Function No.: 40
Fill in the PIN value for automatic PIN entering upon EasyGate UMTS Data
power up. It is applied only if the USIM card is PIN secured. If the given PIN fails
to match the USIM, it is deleted automatically. If entered via a telephone line
upon EasyGate UMTS Data start, the PIN is stored automatically.
Setting options: 0, 4-8 characters (0-9)
Upon full initialization: blank
Service password
Function No.: 90
Fill the service password for programming via a telephone line. Some parameters
can be programmed by DTMF dialing and so the access to programming must be
password-protected.
Setting options: 4-8 characters (0-9)
Upon full initialization: 12345