2N Helios IP User manual, 1510 v1.13 - Manual (Page 106)

Configuration 3.3
106
Associated lock
Set the lock to be activated by a valid card.
Plus card ID
Enter the ID of the plus card to be used for adding items into the list of valid cards
(RFID Card Reader - Installed Cards). If you leave this parameter blank, the
plus/minus card function cannot be applied.
Minus card ID
Enter the ID of the minus card to be used for removing items from the list of valid
cards (RFID Card Reader - Installed Cards). If you leave this parameter blank, the
plus/minus card function cannot be applied.
RFID Card Reader
– Installed Cards
The table includes the list of cards installed in 2N ® Helios IP using the plus and minus
cards. The valid cards can be installed manually too.
Figure 3.41 Card Reader – Installed Cards