2N Helios IP User manual, 1510 v1.13 - Manual (Page 115)

Configuration 3.3
115
SMTP Server Settings
Service enabled
Enable/disable e-mail sending from 2N ® Helios IP.
Server name
Set the server address to which e-mails shall be sent.
Server port
Set the SMTP server port. The default value is 25. Modifications are possible for
other values than the default one.
Login
Enter the user name for SMTP login. If authorisation is required, this field must
include a valid name. If not, this field may be blank.
Password
Enter the password for SMTP server login authorisation.
E-Mail Settings
Sender’s e-mail
Enter the sender’s e-mail address to be included in the messages sent by
2N
® Helios IP.
Default e-mail
In the case of a missed call, 2N ® Helios IP sends a message to the user e-mail
address included in the telephone directory. If the telephone directory field is
blank, the message is sent to the default address included here. If this field is
blank too, no e-mail is sent.
Deliver in
Set how long 2N ® Helios IP should try to deliver an e-mail to an inaccessible SMTP
server.
E-Mail Content Settings
Attach pictures
Set whether the 2N ® Helios IP camera pictures shall be attached to the e-mail
message.
Number of pictures
Set the count of pictures to be taken during ringing and sent enclosed to the
missed call message.
Picture resolution
Set resolution for the pictures to be sent.