2N Helios IP User manual, 1510 v1.13 - Manual (Page 46)

Acoustic Signalling and Keypad Configuration 3.1
46
may be blank.
Password
Enter the password for SMTP server login authorisation.
E-Mail Settings
Sender’s e-mail
Enter the sender’s e-mail address to be included in the
messages sent by 2N
® Helios IP.
Default e-mail
In the case of a missed call, 2N ® Helios IP sends a message
to the user e-mail address included in the telephone
directory. If the telephone directory field is blank, the
message is sent to the default address included here. If this
field is blank too, no e-mail is sent.
Deliver in
Set how long 2N ® Helios IP should try to deliver an e-mail to
an inaccessible SMTP server.
E-Mail Content Settings
Attach pictures
Set whether the 2N ® Helios IP camera pictures shall be
attached to the e-mail message.
Number of pictures
Set the count of pictures to be taken during ringing and sent
enclosed to the missed call message.
Picture resolution
Set resolution for the pictures to be sent.
Subject
Specify the subject of the e-mail message to be sent.
Body
Enter the content of the e-mail message to be sent using any
HTML formatting tags. You can also insert special pre-defined
symbols for certain data, such as user name, date, time,
identification and/or called number. These symbols are
replaced with real values before sending. Refer to the table
below:
$User$
Called user name
$DateTime$ Current date and time
$DialNumber$ Called number