2N Helios IP User manual, 1510 v1.13 - Manual (Page 45)

Acoustic Signalling and Keypad Configuration 3.1
45
Figure 3.38 E-Mail
SMTP Server Settings
Service enabled
Enable/disable e-mail sending from 2N ® Helios IP.
Server name
Set the server address to which e-mails shall be sent.
Server port
Set the SMTP server port. The default value is 25.
Modifications are possible for other values than the default
one.
Login
Enter the user name for SMTP login. If authorisation is
required, this field must include a valid name. If not, this field