2N Helios IP User manual, 1510 v1.13 - Manual (Page 73)

Configuration 3.3
73
Network
This menu is used for setting the 2N ® Helios IP network parameters. A change of any
of these parameters will not show until the next 2N ® Helios IP restart.
By default, obtaining the IP address from the DHCP server is switched on in
2N
® Helios IP (DHCP client enabled). To find the IP address of your 2N ® Helios IP, use
the 2N ® Helios IP Network Scanner program included on the CD. If, in your LAN, the
DHCP server is not used or properly configured for your 2N ® Helios IP, you can push
the appropriate quick dialling button sequence to switch 2N ® Helios IP into the fixed IP
address mode (see the Switching to Default Network Parameters – Dynamic IP
Address subsection).
DHCP Settings
DHCP client enabled
Switch on the function of obtaining the IP address from the DHCP server.
Static Settings
For Windows OS users: find the network parameters by entering ipconfig –all in the
command line.
Static IP address
Set the static IP address assigned by your local network administrator.
Network mask
Set the network mask.
Default gateway
Set the default network gateway.
Primary DNS
Set the IP address of the primary Domain Name Server used in your LAN.
Secondary DNS
Set the IP address of the secondary Domain Name Server used in your LAN.
NAT Settings
These settings are applicable only if 2N ® Helios IP is operated in a LAN and assigned
no public IP address.