Rfid card reader, Access log, Rfid card reader – access log – 2N Helios IP User manual, 1510 v1.13 User Manual
Page 107: Configuration 3.3, Installed cards
Advertising
Configuration
3.3
107
Installed Cards
Card ID
Enter the RFID card ID.
Profile
Assign a time schedule to each card to control its validity. Refer to the Scheduler
subs. for details.
Description
Fill in any information concerning the card, e.g. the card owner. 2N
®
Helios IP
does not use this field.
RFID Card Reader
– Access Log
This table provides information on the last ten cards applied to the 2N
®
Helios IP card
reader.
Figure 3.42 Card Reader – Access Log
Advertising