Auto update, Configuration 3.3 – 2N Helios IP User manual, 1510 v1.13 User Manual
Page 94
Configuration
3.3
94
Be sure to enable the Anonymous access to the JPEG video (see above) for
this function.
You can assign displaying JPEG images to a Snom 820/870 terminal button.
To do this, set the Action URL function and enter one of the commands below
as the parameter:
Chyba! Odkaz není platný. or
Auto Update
2N
®
Helios IP allows both for manual and automatic updates of configuration and
firmware. The automatic update is done through a TFTP server. For Part Nos.
9137131(CK)E, 9137161(CK)E and 9137111(CK)E this function is supported only if a
licence key is inserted, Part No. 9137901.
Figure 3.35 Firmware Update