2N Helios IP User manual, 1510 v1.13 - Manual (Page 67)

Configuration 3.3
67
code entering. You can verify the selected status by a sound signalling. Together with
the scheduler settings, the user activation and deactivation define whether a call will
be established for the given telephone number (for Part Nos. 9137131(CK)E,
9137161(CK)E and 9137111(CK)E with a licence key only, Part No. 9137901).
User Door Lock Codes
Write the user codes for 2N ® Helios IP unlocking. Each user may be assigned two
unique codes for lock 1 and 2 opening. If the codes are identical with other codes
already entered in 2N
® Helios IP, the following mark will appear with the respective
codes: (for Part Nos. 9137131(CK)E, 9137161(CK)E and 9137111(CK)E a licence
key is required, Part No. 9137901).
Card reader
User card ID
Identification of the RFID card assigned to the user.
Scheduler
The scheduler helps you set conditioned calling to user numbers. In case a user is not
present, 2N
® Helios IP need not set up a call to his or her telephone number but can
automatically call other telephone numbers in the directory or the substitute number.
Each user number can be assigned a scheduler – profile. A total of 20 profiles can be
shared by the users (for Part Nos. 9137131(CK)E, 9137161(CK)E, 9137111(CK) this
number is 3, or 20 with a licence key only, Part No. 9137901). There are two possible
ways of profile validity condition setting: time setting in the Time schedule, or manual
setting of the profile activation and deactivation codes. For you to use both the
functions at the same time, the two conditions must be met at the same time.