2N Helios IP User manual, 1510 v1.13 - Manual (Page 121)

2N® Helios IP Control as Viewed by External User
4.1
121
Incoming Call Answer and Reject
If the automatic incoming call answer is disabled (refer to Miscellaneous), a call
coming to 2N
® Helios IP is signalled with loud ringing. Push * to answer and # to
reject the call.
Code Door Opening (Switch Activation)
2N ® Helios IP is equipped with a door unlocking switch. To activate the switch enter
the valid code (see Miscellaneous) on the numeric keypad.
Procedure: Enter the lock 1 or lock 2 activating code using the numeric keypad and
push *.
A valid code is signalled by a continuous switch activation (lock opening) signalling
tone. An invalid code is announced by acoustic signalling
.
User Activation and Deactivation
You can activate or deactivate a user and define call routing to the user telephone
numbers using the numeric keypad. For more details refer to the Telephone Directory
subsection.
Procedure: Enter the user activation or deactivation code using the numeric keypad
and push * for confirmation.
A valid code is announced by acoustic signalling or depending on the code type.
An invalid code is announced by acoustic signalling
.
Profile Activation and Deactivation
You can activate or deactivate a profile and define call routing to the telephone
numbers assigned to the profile using the numeric keypad. For more details refer to
the Scheduler subsection.
Procedure: Enter the profile activation or deactivation code using the numeric keypad
and push * for confirmation.
A valid code is announced by acoustic signalling or depending on the code type.
An invalid code is announced by acoustic signalling
.