2N EasyGate - User Manual User Manual
Page 10
Advertising
5
A transistor switch or logic signal can be used too. The pin near the telephone line
connector is connected to GND of the device the second one is active. Please, respect
the loop current polarity. The input is over-voltage protected (up to +12V DC).
2.8. PC Connection
You have got a serial cable for PC connection. It is a modem cable where all of the 9
pins are 1:1 interconnected – in case you wanted to use another, longer cable. Make sure
that a longer cable works properly to avoid errors at high transmission rates.
Advertising