2N EasyGate - User Manual - Manual (Page 29)

24
Extra tariff Function No.: -
Pseudo tariff metering setting (tariff is based on call duration). The Extra tariff
parameter defines transmitting of fixed quantity of tariff pulses after call start. This
parameter sets minimal call cost.
Setting options: 0-255
Setting step:
1
Default setting: 0
Tariff [s]
Function No.: -
Pseudo tariff metering setting (tariff is based on call duration). The Tariff
parameter sets the call cost according to call duration. Set how often in seconds
do you want to transmit pulses. Smaller number means more expansive call. 0
means not to transmit pulses according to call duration.
Setting options: 0-255 s
Setting step: 1 s
Default setting: 0 s
8.3.3. SMS Sending Input Parameters
Telephone number for SMS
Function No.: -
The telephone number to which an SMS is sent upon SMS input activation. If
blank, the function is off.
Setting options: 0-16 characters (0-9,*,#,+)
Default setting: blank
SMS text
Function No.: -
The SMS text to be sent to the preset telephone number. If the SMS text is blank,
an empty SMS is sent.
Setting options: 0-40 characters
Default setting: blank
Send if activated longer than [ms]
Function No.: -
Set the SMS activation time necessary for SMS sending. This parameter
prevents SMS sending in the event of short-time activation. If a "0" is selected,
SMS is sent immediately upon the input activation.
Setting options: 0-25500 ms
Setting step:
100 ms
Default setting: 0 ms
Timeout after sending [s]
Function No.: -
Set the Time of inactivity after SMS sending. During this timeout no SMS is sent
even if the SMS input gets activated. This prevents sending multiple SMS units in
the case of repeated activation of the input.
Setting options: 0-2550 s
Setting step: 10 s
Default setting: 0 s